Leviton Fixture-Mount PIR Motion Sensor, Indoor/Outdoor, IP65 (120-347V)

The HBE11-IUB 0-10V Dimming Fixture Mount PIR Indoor/Outdoor Wet Location Occupancy Sensor is specifically designed to be mounted directly to an industrial fixture or electrical junction box for control of 0-10V dimmable fixtures. The sensor is IP65 rated making it ideal for wash down applications in indoor and outdoor locations.

We offer this sensor with a variety of lens options including high or low mount lens and high or low mount aisle mask.

MODEL#HBE11-IUB (See full model numbers below)
MANUFACTURERLeviton
INPUT VOLTAGE120-347V
SENSOR TYPEPIR, Indoor/Outdoor
COMPATIBLE WITHSee table below
INSTALLATION METHODInstalls onto a 1/2 inch knockout located on a fixture

 

Model#FIC*DescriptionUse With
HBE11-IUB-HM46With high mount lens, dimming, 120-347VLHB3
HBE11-IUB-LM47With low mount lens, dimming, 120-347VLHB3
HBE11-IUB-HAM48With high mount aisle mask, dimming, 120-347VLHB3
HBE11-IUB-LAM49With low mount aisle mask, dimming, 120-347VLHB3
HBE11-IUB-HOM50With offset adapter, high mount lens, dimming,
120-347V
CS3
VP2
VPHB1
HBE11-IUB-LOM51With offset adapter, low mount lens, dimming,
120-347V
CS3
VP2
VPHB1
HBE11-IUB-HAOM52With offset adapter, high mount aisle mask,
dimming, 120-347V
CS3
VP2
VPHB1
HBE11-IUB-LAOM53With offset adapter, low mount aisle mask,
dimming, 120-347V
CS3
VP2
VPHB1

*Factory-Installed Code.

Download Spec SheetDownload Install Sheet

 

  • Controls 0-10V dimmable ballasts for daylight harvesting applications
  • Interchangeable high/low area detection lenses in 360° view or aisle patterns*
  • Full OFF timer delay
  • 8-second test mode with 1, 5, 10 and 15 minute time outs
  • Unoccupied dimming presets: 70%, 60%, 50%, 20%
  • IP65 rated
  • Meets energy code requirements for ASHRAE 90.1, California Title 24 and IECC, UL and cUL listed

*Lenses must be ordered separately