Leviton Decora® Wall Switch PIR Occupancy Sensor

The Leviton Decora® Wall Switch Passive Infrared (PIR) Occupancy Sensor (ODS10-ID) uses Passive Infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.
Wall switch occupancy sensor with photocell, PIR, selectable auto/manual lighting control, vandal resistant, 2100 sq ft, 120-277V. CEC Title 20/24 compliant. Wall plate sold separately. Color: White.
Order separately

MODEL#ODS10-IDW
MANUFACTURERLeviton
INPUT VOLTAGE120-277V
SENSOR TYPEPIR
COMPATIBLE WITHFPH3-1, FPH3-3 (120-277V only)

 

Download Spec SheetDownload Install Sheet

 

Product Features
Fits in standard wallbox and replaces single-pole wall switch. Gangable with other units.
• Low-profile design eliminates obtrusive “scanning-device” look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton’s popular line of Decora wiring devices.
• 180° field-of-view provides approximately 2,100 square feet of coverage suitable for small offices,
conference rooms, classrooms, lounges and a variety of commercial areas
• Convenient pushbutton provides manual-ON/OFF light switching at any time
• Two dual element PIR sensors used to widen detection range
• Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “minor motion” area where even slight body movements will be detected.
• Vandal resistant PIR lens
• Blinders—horizontal field-of-view may be adjusted between 180° and 60° of arc by using integral blinders located on either side of the lens, no masking tape required
• Manual-ON/auto-OFF mode for installations where manual-ON switching is required but auto-OFF switching is still desired for Title 20 energy savings
• Red LED indicator light flashes when sensor detects motion to verify detection is active and can be used to comply with 2016 Title 24, Part 6 occupancy sensing requirements
• Time Delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20 minutes and 30 minutes. Allows customized adjustments to maximize energy savings.
• Light Sensor Adjustable Ambient Light Override ranges from approximately 2FC (20LUX) to 500+ FC (5,000+ LUX) to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
• Light sensor enables the load hold-OFF feature once level has been set
• Vacancy confirmation—when the time out expires and the lights turn OFF a 30 second vacancy confirmation exists to turn the lights back ON
• False detection circuitry
• Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied
• One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts.
• Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
• Exclusive Leviton High Inrush Stability (H.I.S.) Circuitry—specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service