LED Garage Luminaire with Motion Sensor 60W (120-277V)

The CF3-Series Canopy fixture is a next generation, purpose-built canopy designed for parking garages. With a specially designed fresnel lens to provide 360 degree light dispersal and an integrated motion sensor to detect occupancy, it's the best choice when you need maximum lateral lighting in low height environments.

EFFICACY124.44 lm/W
REPLACEMENT FOR150W High Pressure Sodium

Quick Lighting Layout Tool


Download IES FilesDownload Spec Sheet


Download Sell SheetDownload Motion Sensor Settings


Download Install Sheet

  • Integrated motion sensor settings: detection zone, stand-by, hold, dimming
  • Dimmable
  • Polycarbonate fresnel lens
  • Epoxy potted driver to reduce interference for sensors
  • Aluminum alloy housing finished in white
  • 10 year warranty
  • Mounting plate included for surface mounting
  • Pendant mounting possible with a 3/4″ conduit

Have a question? Just ask!

  1. Answered by the admin

    Hi Greg! Thanks for the question. Our Engineering Manager provided this answer:


    The system wattage is 61.7W (DLC figure) and Power Factor at 0.9103

    Hence, apparent power is 61.7W / 0.9103 = 67.8W

    At 20%, apparent power draw will be 67.8W x 20% = 13.6W.

    Please note that this is a statistical figure based on typical data.  Due to the special conditions of manufacturing processes, typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data.

    If you want to estimate the load to the circuit, please allow 10% tolerance, i.e. 15W.

Send me a notification for each new answer.