HOW TO ASSEMBLE
GLARE SHIELD FOR WP6 WALL PACKS

A. PHILLIPS SCREWDRIVER
B. 4 x MACHINE SCREWS
C. GLARE SHIELD
D. WP6 WALL PACK

WHAT YOU'LL NEED
STEP 1
POSITION THE WALL PACK

Unbox the fixture and rotate it so that the topside of fixture faces you. You will see two screw holes available. This is where the top of the glare shield will be secured.

STEP 2
FASTEN THE TOP SECTION

Place the glare shield on the fixture and align the top holes on the glare shield with the screw holes on the fixture. Insert one M4 screw and tighten.

STEP 3
COMPLETE THE TOP SECTIONĀ 

Insert the second screw and tighten. The top section is now complete.

STEP 4
ALIGN THE LEFT SECTION

Rotate the fixture so that the left side faces you. Ensure that the screw hole on the fixture is aligned side hole of the glare shield.

STEP 5
FASTEN THE LEFT SECTION

Insert the machine screw and tighten. The left section is now complete.

STEP 6
ALIGN THE RIGHT SECTION

Rotate the fixture so that the right side faces you. Align the screw hole with the side hole of the glare shield.

STEP 7
FASTEN THE RIGHT SECTION

Insert and tighten the machine screw. The right section is now complete.

STEP 8
INSTALLATION COMPLETE

The glare shield installation is now complete.

previous arrow
next arrow
Slider
We've changed our Order Desk email to serve you better!
Please submit all POs to [email protected]

Have a question? Contact us here!